Fluke LinkRunner™ AT Network Auto-Tester

Ada Stock

Fitur Fluke LinkRunner ™ AT Network Auto-Tester :

Akurat menguji dan mengidentifikasi masalah konektivitas jaringan dengan AutoTest 10 detik
Uji konektivitas jaringan untuk twisted pair dan Ethernet fiber optik pada tingkat 10, 100 dan Gigabit
Verifikasi panjang kabel Ethernet twisted pair dan wiremap
Ukur Power over Ethernet di bawah beban dengan uji Power over Ethernet TruePower ™
Temukan saklar terdekat dan VLAN
Simpan hasil uji konektivitas jaringan pada tester jaringan atau di awan dengan pelaporan tanpa sentuhan
Merampingkan manajemen hasil uji konektivitas jaringan, laporan, proyek dan staf dengan rekan Link-Live Cloud Service
Pilih yang benar LinkRunner AT Network Auto-Tester untuk pekerjaan ini: LinkRunner AT Network Auto-Tester-2000 atau LinkRunner AT Network Auto-Tester-1000. Lihat grafik perbandingan untuk perbedaan fitur.

Contact Us
email: sales@alatproyek.com atau telepon: 021-29986622 s/d 24

Spesifikasi Detail Fluke LinkRunner™ AT Network Auto-Tester :

Environmental
Operating Temperature and Relative Humidity 32ºF to 113ºF (0ºC to +45ºC) Note: The battery will not charge if the internal temperature of the tester is above 113ºF (45ºC)
Operating Relative Humidity (% RH without condensation) 90% (50ºF to 95ºF; 10ºC to 35ºC) 75% (95ºF to 113ºF; 35ºC to 45ºC)
Storage Temperature -4ºF to 140ºF (-20ºC to +60ºC)
Shock and Vibration Random, 2 g, 5 Hz-500 Hz (Class 2) 1 m drop
Safety EN 61010-1 2nd edition
Safety (LR-AT 2000 only) EN/IEC 60825-1:2007, EN/IEC 60825-2:2004+ A1:2007 (LRAT- 2000 only)
Altitude 4,000 m; Storage: 12,000 m
EMC FCC Part 15 Class A, EN 61326-1
Certifications and Compliance Conforms to relevant European Union directives Conforms to relevant Australian standards Listed by the Canadian Standards Association

General
Media Access; Copper RJ-45: 10BASE-T, 100BASE-TX, 1000BASE-T and PoE (IEEE 802.3af and 802.3at); 100BASE FX and 1000
Media Access; Fiber SFP Adapter Port supports 100BASE-FX and 1000BASE-LX/ SX/ZX (LRAT-2000 Only)
Cable Tests Pair lengths, opens, shorts, splits, crossed, straight through and cable ID
Power over Ethernet (PoE) Single ended testing:
  • User-defined testing to IEEE 802.3at class 0, 1, 2, 3, 4 without LLDP negation, or 4 with LLDP negotiation
  • The following PSE PoE parameters are measured:
    • Pairs used
    • Received class
    • PSE type
    • Unloaded voltage(V)
    • Loaded voltage (V) (LRAT-2000 with TruePower™)
    • Unloaded power (W) (LRAT-1000)
    • Loaded power (W) (LRAT-2000 with TruePower™)
Tone Generator IntelliTone digital tone: [500 KHz]; analog tones: [400 Hz, 1 KHz]
Dimensions 3.5 in x 7.8 in x 1.9 in (8.9 cm x 19.8 cm x 4.8 cm)
Weight 18 oz (0.5 kg)
Battery Removable, rechargeable lithium-ion battery pack (18.5 Watt-hrs) (included with introductory special)
Battery Life Typical operating life is 6 hours; Typical charge time is 3 hours
External AC Adapter/Charger AC input 90 to 264 Vac 48 to 62 Hz input power DC output 15 Vdc at 1.2 amps
Display 2.8 in color LCD (320 x 240 pixels)
Keypad 12-key elastomeric
LEDs 2 LEDs (Link and Receive/Transmit indicators)
Host Interface USB 5-pin mini-B

LinkRunner Manager Software
Supported Operating Systems Windows® Vista, Windows® XP, Windows® 7, Windows® 8
Processor 400 MHz Pentium processor or equivalent (minimum); 1 GHz Pentium processor or equivalent (recommended)
RAM 96 MB (minimum); 256 MB (recommended)
Hard Disk Up to 500 MB of available space may be required
Display 1024 x 768 high color, 32-bit (recommended)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account