Fluke DSX-5000 CableAnalyzer

Ada Stock

Fitur Fluke DSX-5000 CableAnalyzer :

Desain modular Versiv ™ mendukung sertifikasi tembaga, kehilangan serat, pengujian OTDR dan analisis Wi-Fi
Kecepatan yang tak tertandingi untuk Cat 6A, Class FA dan semua standar terkini
Sistem ProjX ™ mengelola persyaratan pekerjaan dan kemajuan dari set-up sampai penerimaan sistem, memastikan semua tes selesai dengan benar
Antarmuka pengguna Taptive ™ menyederhanakan penyiapan, dan menghilangkan kesalahan
Menganalisis hasil tes dan membuat laporan pengujian profesional menggunakan perangkat lunak manajemen LinkWare ™
Secara grafis menampilkan sumber kegagalan termasuk crosstalk, return loss dan shield faults untuk pemecahan masalah yang lebih cepat
ETL Diverifikasi ke IEC Level V - persyaratan akurasi yang paling ketat
Didukung oleh vendor kabel di seluruh dunia
Dibangun dengan kemampuan pengujian Alien Crosstalk
Kompatibel dengan Linkware ™ Live. Linkware Live memungkinkan untuk melacak kemajuan pekerjaan dengan mudah, mendapatkan akses real-time untuk menguji hasil dengan cepat memperbaiki masalah di lapangan, dan dengan mudah mentransfer dan mengkonsolidasikan hasil uji dari penguji ke Perangkat Lunak Manajemen Uji Kabel PC LinkWare ™.

Contact Us
email: sales@alatproyek.com atau telepon: 021-29986622 s/d 24

Spesifikasi Detail Fluke DSX-5000 CableAnalyzer :

Cable Types
Shielded and unshielded pair LAN cabling TIA Category 3, 4, 5, 5e, 6, 6A: 100 Ω
ISO/IEC Class C, D, E, EA, F, and FA: 100 Ω and 120 Ω
Standard Link Interface Adapters
Permanent link adapters Plug type: shielded RJ45
Optional Plug type: Tera
Channel Adapters Jack type: shielded RJ45
Optional Jack type: Tera
Test Standards
TIA Category 3, 4, 5, 5e, 6, 6A per TIA 568-C.2
ISO/IEC Class C and D, E, EA, F, FA certification per ISO/IEC 11801:2002 and amendments
Maximum frequency 1000 MHz
General Specifications
Speed of Autotest Full 2-way Autotest of Category 5e or 6/Class D or E: 9 seconds. Full 2-way Autotest of Category 6A/Class EA: 10 seconds
Support test parameters (The selected test standard determines the test parameters and the frequency range of the tests) Wire Map, Length, Propagation Delay, Delay Skew, DC Loop Resistance, Insertion Loss (Attenuation), Return Loss (RL), NEXT, Attenuation-to-crosstalk Ratio (ACR-N), ACR-F (ELFEXT), Power Sum ACR-F (ELFEXT), Power Sum NEXT, Power Sum ACR-N, Power Sum Alien Near End Xtalk (PS ANEXT), Power Sum Alien Attenuation Xtalk Ratio Far End (PS AACR-F)
Input protection Protected against continuous telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
Display 5.7 in LCD display with a projected capacitance touchscreen
Case High impact plastic with shock absorbing overmold
Dimensions Main Versiv unit with DSX-5000 module and battery installed: 2.625 in x 5.25 in x 11.0 in (6.67 cm x 13.33 cm x 27.94 cm)
Weight Main Versiv unit with DSX-5000 module and battery installed: 3 lbs, 5oz (1.28 kg)
Main unit and remote: Lithium ion battery pack, 7.2 V
Typical battery life: 8 hours
Charge time* Tester off: 4 hours to charge from 10 % capacity to 90 % capacity.
Languages supported English, French, German, Spanish, Portuguese, Italian, Japanese, and Simplified Chinese
Calibration Service center calibration period is 1 year
Environment Specifications
Operating Temperature 32°F to 113°F (0°C to 45°C)
Storage Temperature -4°F to +122°F (-20° C to +50°C)
Operating relative humidity 0 % to 90 %, 32°F to 95 °F (0°C to 35°C)
0 % to 70 %, 95°F to 113 °F (35°C to 45°C)
Vibration Random, 2 g, 5 Hz-500 Hz
Shock 1 m drop test with and without module and adapter
Safety CSA 22.2 No. 61010, IEC 61010-1 2nd Edition + Amendments 1, 2
Operating altitude 13,123 ft (4,000 m)
EMC EN 61326-1
Performance Specifications **
Category 6A/Class EA test modes (or lower link categories) DSX-5000 CableAnalyzer modules exceed with Level IIIe requirements of TIA 1152 and Level IV of IEC 61935-1.
Class FA test modes DSX-5000 CableAnalyzer modules exceed Level V requirements as in the draft 4th edition of IEC 61935-1.
Length of Twisted Pair Cabling1
  Without Remote With Remote
Range 800 m (2600 ft) 150 m (490 ft)
Resolution 0.1 m or 1 ft 0.1 m or 1 ft
Accuracy ± (0.3 m + 2 %); 0 m to 150 m
± (0.3 m + 4 %); 150 m to 800 m
± (0.3 m + 2 %)
Propagation Delay
  Without Remote With Remote
Range 4000 ns 750 ns
Resolution 1 ns 1 ns
Accuracy ± (2 ns + 2 %); 0 ns to 750 ns
± (2 ns + 4 %); 750 ns to 4000 ns
± (2 ns + 2 %)
Delay Skew
Range 0 ns to 100 ns
Resolution 1 ns
Accuracy ± 10 ns
DC Loop Resistance Test
Range 0 Ω to 540 Ω
Resolution 0.1 Ω
Accuracy ± (1 Ω + 1 %)
Overload recovery time Less than 10 minutes to rated accuracy following an overvoltage. Referencing is required after repeated or prolonged overvoltage.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account