LEAKAGE TANG AMPERE (CLAMP METER) AC 1000A TRUE RMS KYORITSU 2413R

Ada Stock

Fitur LEAKAGE TANG AMPERE (CLAMP METER) AC 1000A TRUE RMS KYORITSU 2413R:

  • Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
  • True RMS enables an accurate measurement for distorted waveforms.
  • Measurement from mA up to AC 1000A.
Rp 5.250.000,00

Fitur LEAKAGE TANG AMPERE (CLAMP METER) AC 1000A TRUE RMS KYORITSU 2413R:

  • Large transformer jaws of 68mm diameter makes it possible to clamp on all three or four wires (3 phases) together for leakage current measurement.
  • True RMS enables an accurate measurement for distorted waveforms.
  • Measurement from mA up to AC 1000A.
  • Frequency filter switch to eliminate the effect of the harmonics.
  • 2 way analogue output terminal:
    AC current detected by transformer jaws is converted to AC and DC voltage. Output cord model 7073 (option) is used for monitoring waveform with an oscilloscope or for connecting to a recorder.
AC A
(50/60Hz)
200mA/2/20/200/1000A
|±2.5%rdg±5dgt (200mA/2/20A)
|±3.0%rdg±5dgt (200A, 0~500A)
|±5.5%rdg (501~1000A)
AC A
(WIDE)
200mA/2/20/200/1000A 
|±1.8%rdg±5dgt (50/60Hz) (200mA/2/20A)
|±2.0%rdg±5dgt (50/60Hz) (200A, 0~500A)
|±5.0%rdg (50/60Hz) (501~1000A)
Conductor Size Ø68mm max.
Frequency Response 40Hz~1kHz
Output
Waveform : AC200mV against the maximum value of each range (1000A range is 100mV)
Recorder : DC200mV against the maximum value of each range (1000A range is 100mV)
Crest Factor 3.0 or less
Withstand Voltage 3700V AC for 1 minute
Applicable Standard IEC 61010-1 CAT.III 300V Pollution degree 2
IEC 61010-2-032
Power Source 6F22 (9V) × 1 *Continuous measuring time: Approx. 60 hours
Dimensions 250(L) × 130(W) × 50(D)mm
Weight Approx. 570g (including battery)
Accessories 9094 (Carrying Case)
6F22 × 1
Instruction Manual
Optional 7073 (2WAY Output Cord)
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account